Hoop Descriptions

Hoop-It-All exclusively manufacturers specialty hoops that can be used on hundreds of home and commercial embroidery machines. These specialty hoops give you the ability to do things you'd never be able to do with hoops that were included with your machine. For instance, you can easily hoop baseball caps and embroider on the front on them.

You also can embroider designs much larger than your machine is designed to embroider. How do they do this? After all, if your machine can only embroider 4" x 4", they are not going to change that! Hoop-It-All has designed a special bracket that hooks into your machine just like all of your hoops do and there are special hoops that go with these brackets. The thing that is interesting is that once you connect your HIA hoop to your machine, you can embroider and then slide the hoop to another position on the hooping bracket and embroider again. By putting brackets on multiple sides of the hoop, you can slide the HIA hoop off the bracket and turn it around and re-hoop it on the other side of the hoop and continue embroidering! This also means that you don't have to re-hoop and hope that you can line your design up.

Some of these hoops are unbelievable in size - like 16" x 28"! Hoop-It-All has designed special tables for each machine to support these Super Giant Hoops! Some of the tables are so fantastic that they are made to plug into your existing embroidery machine and move the embroidery arm so that you have a much large area to embroider on.

All Hoop-It-All Hoops use an adhesive paper to hold your item in place. This can be SIA (Stick-It-All) or another adhesive stabilizer available in the stabilizers section of our website. Also, you may need software, such as Buzz Edit or Embird, to split designs which will be embroidered separately.

Hoop-It-All has sold more than 215,000 "Smart Embroidery Hoops" since 1995. This is a well established company and product line. Full instructions and demonstrations are available on the Hoop-It-All website at www.hoopitall.com.

Cap Hoops

Hoop-It-All makes three different hoops for embroidering on baseball caps. They are the Medium Cap Hoop, Big Cap Hoop and Big Multi-Use Cap Hoop. All have the specially engineered clamping system for holding the bill of your cap in place while you embroider.

Medium Cap Hoop Features
- sewing field matches the medium hoop that came with your machine
- a placement template is used to aid in lining up designs on fabric
- it is capable of sewing on all sizes of caps
- it is not capable of sewing large designs
- it is capable of sewing small designs

Large Cap Hoop Features
- sewing field matches the Big hoop that comes with machines capable of sewing large designs
- a placement template is used to aid in lining up designs on fabric
- capable of sewing on all sizes of caps
- capable of sewing large designs
- capable of sewing small designs

Big Multi-Use Hoop
- has a clamp bracket to hold the bill of a cap
- has a sliding bracket
- has other features from Large Cap Hoop

You can embroider to the edge of any fabric easily without stretching the fabric - not just baseball caps!

You can see a movie of the cap hoop in action at the bottom left of the Hoop-It-All website:

http://www.hoopitall.com/index.html

The Hoop-It-All cap hoops include the hoop (or frame), mountin bracket to attach the hoop to your machine, an alignment template for caps, and a sample of SIA adhesive backing.

Click here for more product information

Giant Square Hoop Kits

Probably one of the most popular of the Hoop-It-All hoops is the Quilter's Square. This hoop has brackets on all 4 sides allowing you to embroider a variety of designs in one square without re-hooping your fabric. This is perfect for quilters! Check out this website for a great explanation and pictures:

http://www.hoopitall.com/hoops/quilters_square.html

You can also see a movie at the bottom right of the Hoop-It-All home page at

http://www.hoopitall.com/index.html

The Giant Square Hoop Kits include one giant hoop, one sliding bracket to attach to your machine, one support table and a sample of SIA adhesive.

Giant Long Hoop Kits (Giant L Hoops)

This Hoop-It-All hoop has sliding brackets on the two long sides of the hoop (with the exception of the Bernina Artista which has a sliding rail on only one side of the hoop) allowing you to position your hoop anywhere on either side. This is great for long narrow areas such as shirt fronts.

The Giant Long Hoops include the hoop, bracket to attach the hoop to your machine, a table designed for the hoop's size and samples of SIA adhesive backing.

Super Long Hoop Kits

The Super Long Hoop Kits are for embroider machines that have the embroidery arm located to the left of the needle. These Hoop Kits have a new "unique" adjustable extension table. Both the front and back of the table can be adjusted closer or farther away from the machine without removing the table.

The Super Long Hoop Kits include the hoop, bracket for attaching the hoop to your machine, table and samples of SIA adhesive backing.

Double Wide Hoop Kits

This hoop allows you to sew two full designs side by side. Embroidery on baby socks, panty hose, collars, sleeves, bowling bags, purses - limited by your imagination!

The Double Wide Hoop Kits include a hoop, bracket for attaching the hoop to your machine, Deluxe 3-part table, template and samples of SIA adhesive backing.

Giant R8 Double-Wide Hoops

Sew eight fields in one hooping with the Giant R8 Double-Wide Hoop! It is made for machines where the hoop mounts on the right side. The kit includes the hoop, bracket, deluxe 4-part table, extension cable and samples of SIA adhesive backing.